EnerSys DataSafe NPX-135

DataSafe NPX-135 - 12 Volt/135 Watts per Cell Sealed Lead Acid Battery with M6 Nut & Bolt Terminal

Product Information
DataSafe NPX valve regulated lead-acid batteries are designed for high rate discharge applications. These batteries are used primarily where high wattage is required for a short duration. With 50% more wattage available and a 30% reduction in size over conventional batteries, DataSafe NPX batteries offer a superior value, especially in UPS applications.

• UL recognized
• Sealed construction - can be operated in any position without leakage
• Complies with non-spillable battery regulation, per IATA special provision A67 and 49CFR
• Life expectancy at 25C (77F): Standby use: 3-5 years, Cycle use (approx.): 100% depth of discharge 250 cycles, 50% depth of discharge 550 cycles, 30% depth of discharge 1200 cycles
• Charge retention (shelf life) at 68F (20C): 1 month 97%, 3 months 91%, 6 months 85%
• Operating temperature range: Charge 5F to 122F (-15C to 50C), Discharge -4F to 140F (-20C to 60C)
• Standard housing material: ABS resin with optional V-0 Flame Retardant ABS

• Maintenance free technology - no water to add
• High rate charge and discharge capable
• Long cycle life - up to 1500 charge/recharge cycles
• 1 year manufacturers warranty

Model	EnerSys DataSafe NPX-135
SKU	36L108S5
Weight	26.4
Manufacturer	Enersys
Voltage	12 Volts
Capacity	33 Amp Hour(s)
Dimensions	7.76" (L) x 5.16" (W) x 6.22" (H)
Dimensions (Metric)	197.00mm(L) x 131.00mm(W) x 158.00mm(H)
PPS Family Code	SL108

Product Notes

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: