Standard Sealed Lead Acid Batteries

Click Here for Long Life Sealed Lead Acid Batteries.

Features:

• Leak- resistant structure - A required-minimum quantity of electrolyte is impregnated into, and retained by, the positive and negative plates and the separators; therefore electrolyte does not flow freely. Also, the terminal has a sealed structure secured by long adhesive-embedded paths and by adoption of strong epoxy adhesives which make the battery leak resistant.
• Long service life - Service life of Panasonic's long life series (LC-P, LC-X series and LC-TA122P, LC-122P) batteries is approximately double that of conventional (LC-T, LC-R and LC-L series) batteries.
• Easy maintenance - Unlike the conventional batteries in which electrolyte can flow freely, SLA batteries do not nee the specific gravity check of the electrolyte nor the watering structurally; this makes the battery function fully and makes maintenance easy.
• No sulfuric acid mist or gases - Unlike conventional batteries in which electrolyte can flow freely, SLA batteries generate no sulfuric acid mist or gases under the use condition recommended by Panasonic. In uses under conditions other than recommended, however, gas generation may occur, therefore do not design or use the battery in a housing with a closed structure.
• Exceptional deep discharge recovery - The Panasonic SLA battery shows exceptional rechargeability even after deep discharge, which is often caused by failure to turn off the equipment switch followed by standing discharged.

Click on the Model Number for detailed specifications and ordering information.

* - AP suffix has threaded post terminals; P suffix has through hole (nut and bolt) M5 terminal

** - Please fill out a Request for Information for price and availability.

Panasonic Long Life Sealed Lead Acid Batteries:

Overview:

Panasonic's "trickle long life" series was developed by studying and analyzing the factors which caused deterioration of conventional batteries in various aspects. further, whereas conventional batteries needed separate bolts and nuts for connection, medium capacity (28 to 42Ah) type batteries of this series adopt unique terminals which have been made into bolts (threaded post) for simpler installation and better safety; this makes replacement and connection of the batteries easier.

The safety and reliability of these batteries has been greatly improved through the adoption of flame-retardant resins. (For 2.0Ah and 28 to 100Ah, 94HB-equivalent resin is standard; 94V-0-equivalent resins are also available as special order).

Features:

• Much longer trickle life compared with conventional batteries was achieved with the battery footprint unchanged.
• For easier installation, an optional threaded post terminal was added in addition to the nut and bolt terminal for the 20 Ah, 28Ah and 42Ah batteries. The threaded post terminal is designed with an "AP" suffix.

Click on the Model Number for detailed specifications and ordering information.

* - AP suffix has threaded post terminals; P suffix has through hole (nut and bolt) M5 terminal

** - Please fill out a Request for Information for price and availability.