Powersonic PS-610 – 6 Volt/1 Amp Hour Sealed Lead Acid Battery with 0.187 Fast-on Connector
Product Information
SLA Valve Regulated Design – Our batteries incorporate a series of one-way low pressure valves. These self sealing valves allow the venting of any excess gasses that may be produced in the battery due to severe overcharging.
Design Flexibility – Batteries may be used in series and/or parallel to obtain choice of voltage and capacity. Due to recent design breakthroughs, the same battery may be used in either cyclic or standby applications.
Rugged Construction – The high impact resistant battery case is made of nonconductive ABS plastic to UL94-HB. This material imparts very good resistance to shock, vibration, chemicals and heat.
Wide Operating Temperature Range – Power-Sonic batteries may be discharged over a temperature range of -40C to +60C (-40F to +140F) and charged at temperatures ranging from -40C to +50C (-40F to +122F)
Long Service Life – Under normal operating conditions, four or five years of dependable service life can be expected in stand-by applications, or between 200 and 1000 charge/ discharge cycles depending on the average depth of discharge.
Deep Discharge Recovery – Special separators, advanced plate composition, and a carefully balanced electrolyte system have greatly improved the ability to recover from excessively deep discharge.
Lead Calcium Plates – Heavy duty lead calcium plates provide an extra margin of performance and life in both cyclic and float applications and give unequaled recovery from deep discharge.
Operation in any Orientation – Our SLA batteries can be discharged in any orientation, without reduction in performance or leakage of electrolyte.
Long Shelf Life – A low self discharge rate allows storage of fully charged batteries for extended periods of time before charging is required. Lower storage temperatures further enhance shelf life characteristics.
Complies with IATA/ICAO Special Provision A67 for air transport.
Dave Premo is the owner and founder of Portable Power Systems. As an Electrical Engineer, he began his career in aerospace where he worked for many years. An opportunity. Tired of the corporate grind and brutal inefficiencies, he set out to start his own company. Like many new business owners, it started in his basement. By providing reliable products with engineered design, Dave has brought a professionalism to the industry that it severely lacked.
Shipping Cutoff Times
Ground Small Package
Individual boxes weighing less than 80lbs each and less than 5 boxes per shipment. Typical transit 3-5 business days.
4PM EST
Express Small Package
Individual boxes weighing less than 80lbs each and less than 5 boxes per shipment. Ship methods include overnight, 2 day or 3 day.
5PM EST
Ground Freight (LTL)
Palletized shipment traveling by ground (freight truck). Must have a receiving dock at delivery address. Typical transit 3-5 business days.
4PM EST
Express Freight
Palletized shipment traveling by air to local terminal, completed by ground. Must have a receiving dock at delivery address. Ship methods include 1, 2 or 3 day.
Reviews
There are no reviews yet.